-MAKE SURE SD CARD ON "OPEN" - THIS IS THE PROTECTION SWITCH, YOU CANNOT RECORD ON "CLOSED".
-SD CARD INSERTED IN SLOT BENEATH VIEFINDER
-BATTERY OACK CLICKS INTO PLACE BY PLACING INTO COMPARTMENT AND SLIDING TO THE LEFT, TO RELEASE SLIDE TO THE RIGHT.
-CAMERA HAS BUILT IN MIC, EXTRA BOOM MIC CAN BE APPLIED
-ON/OFF BUTTON ON SIDE OF CAMERA, PRESS IN BLUE BUTTON THEN MANOUVER
-"POWER ON" TONE SOUNDS AFTER CAMERA IS TURNED ON
-POWER SAVE FUNCTION IS APPLIED AFTER CAMERA IS DORMANT FOR FIVE MINUTES
-PRESSING "FULL AUTO" BUTTON SWITCHES BETWEEN AUTO AND MANUAL FOCUS SHOOTING MODES
-PRESS "GAIN" TO "HIGH" SETTING FOR LENSE TO TAKE IN MORE LIGHT WHEN RECORDING
-W/T TOGGLE FOR ZOOMING, LOCATED ABOVE CAMERA BRACE
-ND FILTER CHANGES LIGHT SETTINGS, FOR EG. SUNNY DAY, ND FILTER STOPS TOO MUCH LIGHT FROM GETTING IN
-INDEX BUTTON CAN TELL YOU RECORDING TIME AND BATTERY LIFE LEFT
-CAM/MEDIA BUTTON SENDS YOU TO RECORDING AND PLAYBACK MENU, EACH CLIP IS SHOWN IN GROUPS OF NINE.
-"5 SECOND RULE" MUST BE APPLIED WHEN FILMING TO COMPENSATE FOR LEFT OVER MATERIAL NEEDED FOR APPLYING DISSOLVE AND FADE TRANSITIONS WHEN EDITING AND TO MAKE SURE VITAL VIDEO ISN'T LOST.
-THE TRIPOD HAS A SPIRIT LEVEL WHICH MEASURES HOW LEVEL THE TRIPOD IS AND HOW STRAIGHT IT IS, WHEN THE SPIRIT IS IN THE MIDDLE OF THE LEVEL, THE TRIPOD IS STRAIGHT.
-SLIDE CAMERA ON FROM BACK AND SLIDE FOREWARDS TO PLACE ON TRIPOD HOLDER, THEN SECURE THE CAMERA ON THE TRIPOD BY ADJUSTING THE TOGGLE ON THE SIDE.
-THE RED BUTTON ON THE SIDE OF THE CAMERA HOLDER ON THE TRIPOD RELEASES THE CAMERA FROM THE TRIPOD.
-DO NOT CHANGE MENU SETTINGS ON CAMERA UNLESS IT WILL NOT BE COMPATIBLE WITH FINAL CUT PRO SETTINGS WITHIN COLLEGE
-DO NOT GET CAMERA EQUIPMENT WET
-ALL MEMBERS OF THE GROUP RESPONSIBLE IF CAMERA IS LOST OR DAMAGED
-CHECK CAMERA IS OPERATING PROPERLY BEFORE LEAVING BUILDING
- CAMERA MUST BE RETURNED ON TIME
No comments:
Post a Comment